Falcon steel rims, fit on aristo?

Miggy

I’m thinking about getting some falcon steel rims and later on putting on some MT drag slicks when/if my aristo's power starts to climb high...So will they fit I'm guessing they will? Or is there better options of good cheap rims I should consider?

Thanks
_________________

Aristo 454hp @ 22psi / C20 350 chev pickup / AE92 corolla

Import Monster

Import Monster · Posted: Mon Jan 07, 2008 9:41 am Post subject:

Supra 16" rears are 9" wide - usually pick up a full set for a few hundred bucks. the 17" versions are 9.5" on the back but are a lot more expensive (and rubber gets a lot more expensive too)

keiser soze · Posted: Mon Jan 07, 2008 9:58 am Post subject:

are you going to run slicks or the et drag radials?

the 235/50-16's need at least a 6.5" rim (should use a 7" but), so you need a falcoon rim 15x7 preferably.

Or, you could just use an aristo rim with the 16" drag radial. They make a 255/50-16, will work fine with the stock rim.

I am going to get a set of mickey thompson sportsman tyres and use them. They are treaded but have the same slick compound and crinkly wall, and are pretty cheap ($250 a tyre thru a mate [i cant get m/t thru work anymore]) and are 26x9.5-16.

rhetto · Posted: Mon Jan 07, 2008 3:23 pm Post subject:

yep yep.ba and bf falcon rims fit perfect.i put them on for skid rims all the time.16inch rims, and for territoy rims 17 inch.aristos skid hard 3 gear 180on the spot 15psi

tomee · Posted: Mon Jan 07, 2008 4:54 pm Post subject:

hey guys, sorry to be abit off the topic, but what is the thread sizes on Aristo, in the case i want to purchase locknuts?

is it 1.25 x 12mm?

drdrift_k · Posted: Mon Jan 07, 2008 6:15 pm Post subject:

17" ford territoy rims are the go! i got a set for $40 Very Happy

_________________

Supra in Tuxedo

Miggy · Posted: Mon Jan 07, 2008 9:49 pm Post subject:

Thanks for the info guys now i just need to have a look around.
_________________

Aristo 454hp @ 22psi / C20 350 chev pickup / AE92 corolla