Aluminium welding in Perth

Cerium · Posted: Tue Nov 08, 2011 9:15 pm Post subject: Aluminium welding in Perth

Can anyone recommend a shop to get some aluminium welding done in Perth? Or does anyone on here have a TIG and need some beer? Very Happy

Cerium · Posted: Fri Nov 25, 2011 5:09 pm Post subject:

Someone must have had some aluminium welding done sometime?

Chappo · Posted: Fri Nov 25, 2011 5:11 pm Post subject:

What do you need welded? Most good welding places should be able to do it for you.

I was however unable to find anyone to modify my aluminium driveshaft..

Cerium · Posted: Fri Nov 25, 2011 5:14 pm Post subject:

Just some fittings on the intake and intercooler pipes, pretty straight forward stuff. If there's no recomendations I'll make some calls and find someone close but I prefer to use known good shops whenever posssible.

bulldogger · Posted: Fri Nov 25, 2011 6:02 pm Post subject:

how about wtf auto
_________________

a real car has 3 pedals
aristo's,rx3 fj20t,urvan z18t,v6 sigma,starion's,la lancer 2.6t aka 4u2no,gc galants
vn/lexcen turbo ,202 six 1200 ute,gh sigma turbo's
escorts,et turbo's,rx7 s3 13b jay port,ta22 celica

Aristoman · Posted: Fri Nov 25, 2011 6:33 pm Post subject:

Metalcraft Marine, guy theres a fuckin champ....Ballbusting fabricator Very Happy

_________________

WA's Most Powerful 6spd Aristo Burnout

The Aristo Spare Parts Man Very Happy

Rusty P · Posted: Fri Nov 25, 2011 7:00 pm Post subject:

No-one wants to touch your driveshaft Chappo?

That says something for the quality of work going around doesn't it? :/
_________________

1994 Black JZS147 Aristo - RIP. Went swimming
New 1992 Aristo Project

Woggin · Posted: Fri Nov 25, 2011 7:12 pm Post subject:

Chappo · Posted: Fri Nov 25, 2011 7:22 pm Post subject:

An Alu driveshaft? If so I might have to go see him..

Apparently there is no1 in Perth with the right gear to do it..

2j inatux · Posted: Fri Nov 25, 2011 7:48 pm Post subject:

hoffmann engineering and veem engineering both have the gear required to machine weld and balance the drive shaft the problem might be if they a willing to take on a one off job but worth a call

mxracer · Posted: Fri Nov 25, 2011 11:15 pm Post subject:

i can weld alloy and have a tig , but gas is $170 a bottle and doesnt last long ,
depends how much welding you want done. i could prob do with some cash , as drinking is a no no

mxracer · Posted: Fri Nov 25, 2011 11:17 pm Post subject:

have u got t04z , 264 .. running ?? or still in process ?

ps c-red , wtf can all weld alloy too

Cerium · Posted: Sat Nov 26, 2011 3:26 am Post subject:

Woggin · Posted: Sat Nov 26, 2011 4:32 am Post subject:

try final drive engineering in oconnor, highly recommend them, they did the driveshaft in my ol jza70, we had a single piece made up by veem and i twisted the yoke coz they built it like shit, final drive took less than a day to build a new one from scratch, even had it on the hoist when i went to pick it up, to show me, looked fucking awesome, not a bad price either!!

oh and btw....i was being dirty bout the touching his driveshaft!!
_________________

JZS147 CLUB STICKERS
http://www.jzs147.com.au/forum/viewtopic.php?t=13060

JZS147 stock snails 12.58@115, T04Z is here, still in beta!
92 r32 gtst daily

Old rides: 04 zze123r, 98 ae111r, 92 ep82gt, 92 sw20r, 00 ncp10r, 91 uzz31, 84 Ma61, 88 gz20, 90 jza70, 90 jza70 aerotop

mxracer · Posted: Sat Nov 26, 2011 12:08 pm Post subject:

nice build thread .. im planing a similar setup , i might have to do some welding and steal some info while im doing it

Cerium · Posted: Sat Dec 03, 2011 10:19 pm Post subject:

Cheers for the recommendations everyone.
mxracer, your welcome to come check out the car sometime if your after some ideas.