FUEL PRESSURE REG ADAPTOR

[rhetto]

HI all,just curious when you guys have changed the fuel pressure reg to an aftermarket reg,what did you do for an adaptor to blank the standard fuel reg

[aristo_tt]

Something along the lines of this, but obviously you would go from rail return to FPR and then bottom of the reg would look like this:

http://mkiv.com/techarticles/fuel_bypass_line/index.html

Cheers

[ems3s]

Turbosmart fuel reg adapter with a small 90 degree elbow fitting, don't buy the straight type adapters from eBay they don't fit under the throttle linkage.

[rhetto]

[ems3s]

It's on their website and available from autobarn. Most carry it in stock.

[ems3s]

[moffatt]

TS-0402-1002 is the part number and http://www.turbosmartonline.com/index.php?id=35 is the link to turbosmart online. i used a 1/8 90 from proflow and a couple more fittings just to make it work. like i said before though, use a short 90 or it will hit the throttle linkage.

i had to rub back to adaptor slightly to get it to fit into the rail but nothing major.

Nick

[ems3s]

The turbosmart adapter fits straight on, I've done 3 now with no issues. Just buy a simple brass 90 degree fitting with a barb end. Seriously only take an hour or so to bolt in an a/m fpr

[rhetto]

thanks guys,i ordered the part $300 and will be here tuesday,i'll just have to get the 90 when i get the part,maybe just from pirtek

[moffatt]

[rhetto]

my bad,$30

[Chappo]

Struggling with the decimal places recently Rhetto..

From now on every number you post I am dividing by 10 to get the correct figure.. That also goes for FS posts..

[rhetto]